Uptech Engineering

Electro Permanent Light Duty Chuck (50x50 Quard Pole)

Features:

• Work holding device for Milling machines

• Cold device as it doesn't require power continuously except for short period of activation & deactivation

• Suitable for light milling i.e. 1-3 mm depth of cut at recommended speed & feed

• Maximum material removal is possible

• Economical for operation & maintenance

• No accidents due to power failure

• Variable supply unit to vary power which helps in alignment of jobs

• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, Electrical & Demagnetizing tests

• Good quality & standard electrical accessories

• We also manufacture Special chucks to suit individual requirement

Specifications:

Electro Permanent Magnetic Chuck Milling

Features:

Work holding device for conventional & CNC milling m/c

Cold device as it doesn''''t require power continuously except for short period of activation & deactivation

Suitable for light milling i.e. 3-6 mm depth of cut at recommended speed & feed

Maximum material removal is possible

Economical for operation & maintenance

No accidents due to power failure

Variable supply unit to vary power which helps in alignment of jobs

Chuck is tested for Slippering force, Waterproof test, Temperature rise test, Electrical & Demagnetizing tests

Good quality & standard electrical accessories

We also manufacture special chucks to suit individual requirement

 
Specifications:
Sr. No.
Cat No.
Size (mm)
1
UL 71901
600 L x300 W x 80H
2
UL-71902
750 Lx 300 W x 90 H
3
UL- 71903
1000 Lx 300 W x 90 H
4
UL- 71904
1500 Lx 300 W x 90 H
5
UL- 71905
600 Lx 400 W x 90 H
6
UL- 71906
750 Lx 400 W x 90 H
7
UL -71907
1000 Lx 400 W x 90 H
8
UL-71908
1500 Lx 400 W x 90 H
9
"Ultra" control unit with variable supply
 
10
"Ultra" pole extension block
 
11
Special "ultra" pole extension block
 
12
"Ultra" spring pole extension block
 
 

• EPM chuck is designed in such a way that it is very useful for horizontal machining centers.it is also useful in conventional machining for horizontal milling operation
• As electro-permanent magnetic (EPM) principle is used continues electricity is not required
• Easily integrated with pallet clamping
• Manufactured as per customer requirement

Features:

• Continuous Electricity is not required. 100% safe in use
• Power for all poles transferred to ring/plates to hold the job firmly
• Assembled with powerful magnets. So heavy cut can take
• Poles individually magnetized for full loading power

• Used in vertical and horizontals turning of lathes.
• Radially movable location blocks will help to position and secure work pieces. This is also necessary for clearance of the cutting tool or wheel.

Specifications: